Room ideas / Bedroom
Bedroom lighting ideas: layers, bulbs and where to put them
A bedroom needs three kinds of light: something soft for the whole room, a reading light for each side of the bed, and a low glow for evenings and getting up in the night. One bright ceiling light does none of these well.

Three layers of bedroom light
- Give each side of the bed its own reading light that you can switch from the pillow.
- Use warm white bulbs, around 2700K, throughout, and put the main light on a dimmer if you can.
- Add one low light, such as a floor lamp in a corner or a plug-in night light, so you never need the ceiling light after dark.
Light for getting ready, reading and winding down
A bedroom is used for different things at different times: getting dressed in the morning, reading in bed, winding down in the evening and finding your way in the dark. Bedroom lighting works when each of those has its own light, so you are never using a bright overhead bulb to read or a dim lamp to choose clothes.
Designers talk about three layers. General light lights the whole room, from a ceiling fitting or a couple of lamps. Task light lights a job: reading in bed, a dressing table, a wardrobe. Accent or low light adds a glow to a corner, a shelf or under the bed, for the evening and for night-time trips.
The difference between a harsh bedroom and a cosy one is mostly bulb colour and where the light sits. Warm white bulbs, light at low and middle heights, and dimmers do more than any single fitting.
Five lighting setups
- Two lamps and a dimmer
- A matching table lamp on each bedside table, with fabric shades whose lower edge sits about at shoulder height when you sit up in bed, and the ceiling light on a dimmer switch. The simplest setup that covers everything.
- Wall lights for small rooms
- Plug-in swing-arm wall lights on each side of the bed, mounted about 24 to 30 inches above the top of the mattress so the light falls on the page. They free the bedside table entirely.
- Pendants either side
- Two small pendants hanging beside the bed at about bedside lamp height, wired in or on plug-in hooks. Good when the bedside tables are very small.
- Corner floor lamp
- A paper or linen floor lamp in the corner opposite the bed, switched on in the evening instead of the ceiling light. It lights the room softly and shows off the walls.
- Low night light
- A motion-sensor strip under the bed frame or a plug-in night light near the door, set to a dim amber glow. You can get to the bathroom without waking yourself up fully or disturbing a partner.
Bulbs, height, switches and renting
- Bulb colour and brightness
- For a bedroom, choose warm white bulbs labelled 2700K or a little lower; 4000K and above looks cold and office-like. For reading, a bulb of about 450 to 800 lumens in the bedside lamp is plenty. Brightness shows on the box in lumens, not watts, on LED bulbs.
- Height and glare
- A bare bulb at eye level is uncomfortable from the bed. Choose shades that hide the bulb when you are lying down and sitting up. For wall lights, check the arm reaches over the book without shining into your partner's face.
- Switches
- The best setup fails if you have to get out of bed to turn things off. Use lamps with switches on the cord or base within reach, smart plugs or bulbs, or a two-way switch so the ceiling light can be turned off from the bed.
- Renting
- You can do all of this without rewiring: plug-in wall lights with cord covers, table and floor lamps, smart bulbs in the existing ceiling fitting, and plug-in night lights.
Plan from the bed outwards
Start in bed. Sit up as if reading and check whether you can switch a light on and off and whether it lights the page without glaring. Fix that first for each side of the bed, with lamps or wall lights. Then lie down and look at the ceiling light: if it is a bare bulb or very bright, change to a warm white bulb, add a shade and fit a dimmer or smart bulb.
Next, walk the room in the evening with only the bedside lights on and notice the dark spots. A floor lamp in a dark corner, a lamp on a chest of drawers or a light inside the wardrobe usually solves them. Finally, add a low night light between the bed and the door. Run cords along the skirting or behind furniture, and check every lamp has a switch you can reach from where you use it.
Shop the pieces
16 bedroom pieces
Links open similar items, not the pictured ones.
-

Warm white LED strip light
What to check
Measure the length you want to light and check the warm white colour temperature suits the room.
-

Bedside table lamp with shade
What to check
A shaded lamp spreads soft light. Check the bulb type and the shade height against your bedside table.
-

Plug in wall reading light
What to check
Mount the light high enough to clear your head when sitting up, and check the plug reaches an outlet.
-

Wall mounted bedside drawer
What to check
Wall-mounted drawers need solid fixings and leave the floor clear. Mount them at a height you can reach from bed.
-

Bedside reading lamp
What to check
Check the lamp's height and dimming range. A touch base is easy to find in the dark.
-

Small bedside table with drawer
What to check
Check the table height against your mattress and that the drawers open without hitting the bed frame.
-

Bedside lamp
What to check
Measure from the nightstand top to your shoulder when sitting up in bed. A lamp whose shade ends near that height lights a book without glare.
-

Floor lamp
What to check
Measure the arc reach and the floor space for the base. Arc lamps need weight at the base to stay steady.
Show all 16 pieces
-

Floor mirror
What to check
A large floor mirror is heavy. Check whether it leans with a stand or should be fixed to the wall, especially with children or pets.
-

LED strip
What to check
Measure the run you want to light and check where the power plug will reach. Adhesive strips stick best on clean, smooth surfaces.
-

Oak wood bed frame
What to check
Check the slat spacing for your mattress type and the height under the frame for storage.
-

Striped lumbar pillow cover
What to check
A lumbar pillow sits low against the headboard or sofa back. Check the cover size against your insert.
-

Wood floating wall shelf
What to check
Check the shelf depth and weight rating, and fix into studs or solid wall plugs.
-

Bouclé pillow
What to check
The linked covers are faux fur, not bouclé. Check the cover size and whether inserts are included before you buy.
-

Canopy bed
What to check
Measure your ceiling height before buying a canopy frame. In a low or sloped room the posts can make the space feel smaller.
-

Corner desk
What to check
Measure both walls and the diagonal path into the room. Large L desks often arrive in heavy flat-pack boxes.
The gallery
8 bedroom looks
Open a look to see its pieces.
Keep exploring
Related guides
Work & gamingA desk needs bright, even light without glare on a screen; a bedroom needs warm, low light that helps you wind down.
BathroomBathroom lighting needs damp-rated fittings and clear light on the face at the mirror, while bedroom lighting is softer and layered.
Questions
What colour bulb is best for a bedroom?
Warm white, around 2700K. It looks like a traditional bulb and is more relaxing in the evening than cool white.
How high should bedside wall lights be?
About 24 to 30 inches above the top of the mattress is a common guide, so the light falls on your book when you sit up. Check it with a piece of tape before you fix it.
Do I need a ceiling light in the bedroom?
It helps for cleaning and finding things, but put it on a dimmer and use lamps for most of the evening.
How do I light a bedroom without rewiring?
Plug-in wall lights, table and floor lamps, smart bulbs in the existing fitting and plug-in night lights.







